Description Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed7. Note: No Fingerprint Identification Specification: Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch

Read more less

Description Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly with frame (TFT Material) for Samsung Galaxy A502. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed Specification: General Compatible with Samsung:  Galaxy A50 Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Read more less

Description 1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation. Specification: General Compatible with Samsung:  Galaxy A15 5G Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch

Read more less

Description About the product1. Replacement LCD display + touch screen digitizer assembly for Lenovo Tab E7 TB-7104 TB-7104I TB-7104F TB-7104N.2. Replace your broken or unusable item with a new one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation Notes1. Tips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.2. Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.3. Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. Specification: General Compatible with     Lenovo:  Tab E7 Package Weight One Package Weight 0.58kgs / 1.28lb One Package Size 35cm * 26cm * 7cm / 13.78inch * 10.24inch * 2.76inch

Read more less

Description Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in device. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed Specification: General Certificate GPSR Compatible with     Blackview:  BV6200 Pro Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Read more less

Description Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Specification: General Compatible with     Samsung:  Galaxy A05s Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Read more less

Description 1. Range: 100M+2. Light source: LED wick3. Lumen: 500lm4. Waterproof grade: storm waterproof5. Battery: Built-in 1 x 18650 lithium battery6. Charging time: about 4-5H7. Continuity: about 2-3H8. Charging interface: Type-C9. Shell material: ABS10. Gear:- Main light: strong light, weak light, burst flash- Side light: strong light, weak light, red light, red flash11. Weight: about 56.5g12. Size: about 12 x 3cmFeatures:1. Life waterproof, thickened waterproof seal, circuit cool edge design2. Large flood light, can be used as camping light/working light/reading light/spotlight, etc.3. ABS material, smooth hand feeling, one hand control4. Multi-speed switching, according to different use environment to change the light, easy to use5. Wide-angle effect, super strong long-distance shooting, bright and clear field of vision, flick switch to switch the side light mode6. Charge indicator, real-time monitoring of power usage7. LED wick, high power strong brightness, stable light output Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 15cm * 6cm * 6cm / 5.91inch * 2.36inch * 2.36inch

Read more less

Description Features:1. Made of ABS material, lightweight and durable.2. Unique appearance design, large gold-plated area, showing fashionable and beautiful temperament.3. Use DSP sound field processing to support sound changes to meet your entertainment needs. Using a newly upgraded microphone pickup, the sound is loud without distortion.4. Built-in diaphragm magnetic dual speakers provide high-definition sound quality and stereo surround, ensuring a more enjoyable music experience for you.5. Suitable for singing at home, KTV, and outdoors. It supports dual microphone interconnection and can be connected to the same mobile phone to sing the same song and realize a duet.Specifications:1. Bluetooth version: V5.02. Bluetooth distance: 10M3. Battery capacity: 4000mAh4. Battery life: 6 hours5. Frequency response range: 60Hz-15KHz6. Speaker power: 4 ohm 10W x 27. Signal-to-noise ratio: greater than or equal to 80dB8. Size: 22x7.5x6.5CM9. Weight: 1250GPacking list:- Bluetooth Speaker- microphone- Charging cable- manual Specification: General Certificate CE, ROHS Package Weight One Package Weight 1.30kgs / 2.87lb One Package Size 24cm * 14cm * 12cm / 9.45inch * 5.51inch * 4.72inch

Read more less

Description 1. Input：100-240V 50-60Hz2. Output:19V 1.75A 33W,3. Connector: 4.0*1.35mm,4. Cable: 1.8m5. For Asus Vivobook:S200 S200E S220 X200T X201E X202E F201E Q200E;Asus Q302 Q302L Q302LA; for Asus Chromebook 11.6" C200 C200M C200MA C200MA-DS01;for 13.3" C300 C300M C300MA C300MA-DB01; for ASUS AC1900 RT-AC68U Specification: Package Weight One Package Weight 0.21kgs / 0.46lb One Package Size 19.5cm * 12cm * 4.5cm / 7.68inch * 4.72inch * 1.77inch

Read more less

Description 1. Main fabric composition: polyester-cotton2. Grammage: 80g/m23. Breathable hole design, comfortable to wear, not stuffy.4. Metal buckle, flexible adjustment of the cap circumference5. Sandwich visor design, three-dimensional version6. Neat stitching, sturdy and not easy to deform7. Print on your demand, personalized customization, fashionable and stylishPrint On Demand NotesAbout color differenceThe picture was taken by a professional photographer and corrected later. There may be color differences in the actual color of the base cap, please understand.Printing color differenceDue to the differences between factory printing and display usage, it may not be possible to restore the renderings 100% under normal circumstances. lf you have strict requirements on the actual printing effect, providing the specific Pantone color number of the print can minimize the color difference of the print.About fadingBe careful not to soak in hot water, soapy water, or alkaline water for a long time when washing.Do not scrub the printed part vigorously, it is recommended to wash dark and iaht-colored clothes separately to avoid staining.Washing reminderWater temperature below 30 degrees CelsiusAvoid direct sunlightCannot driftCannot dry cleanCannot tumble drylroning below 110 degrees Celsius Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 16cm * 16cm * 8cm / 6.3inch * 6.3inch * 3.15inch

Read more less

Handcrafted from natural coconut shell, these earrings bring a unique island-inspired style with a lightweight and comfortable feel. Each piece features beautiful organic textures and earthy tones, making every pair one of a kind. Perfect for casual wear, beach outings, or adding a touch of tropical elegance to your look. Eco-friendly, durable, and artisan-made, these coconut shell earrings are a stylish celebration of nature and sustainable fashion.

Read more less

Handcrafted from natural coconut shell, these earrings bring a unique island-inspired style with a lightweight and comfortable feel. Each piece features beautiful organic textures and earthy tones, making every pair one of a kind. Perfect for casual wear, beach outings, or adding a touch of tropical elegance to your look. Eco-friendly, durable, and artisan-made, these coconut shell earrings are a stylish celebration of nature and sustainable fashion.

Read more less

Handcrafted from natural coconut shell, these earrings bring a unique island-inspired style with a lightweight and comfortable feel. Each piece features beautiful organic textures and earthy tones, making every pair one of a kind. Perfect for casual wear, beach outings, or adding a touch of tropical elegance to your look. Eco-friendly, durable, and artisan-made, these coconut shell earrings are a stylish celebration of nature and sustainable fashion.

Read more less

Handcrafted from natural coconut shell, these earrings bring a unique island-inspired style with a lightweight and comfortable feel. Each piece features beautiful organic textures and earthy tones, making every pair one of a kind. Perfect for casual wear, beach outings, or adding a touch of tropical elegance to your look. Eco-friendly, durable, and artisan-made, these coconut shell earrings are a stylish celebration of nature and sustainable fashion.

Read more less

Handcrafted from natural coconut shell, these earrings bring a unique island-inspired style with a lightweight and comfortable feel. Each piece features beautiful organic textures and earthy tones, making every pair one of a kind. Perfect for casual wear, beach outings, or adding a touch of tropical elegance to your look. Eco-friendly, durable, and artisan-made, these coconut shell earrings are a stylish celebration of nature and sustainable fashion.

Read more less

Handcrafted from natural coconut shell, these earrings bring a unique island-inspired style with a lightweight and comfortable feel. Each piece features beautiful organic textures and earthy tones, making every pair one of a kind. Perfect for casual wear, beach outings, or adding a touch of tropical elegance to your look. Eco-friendly, durable, and artisan-made, these coconut shell earrings are a stylish celebration of nature and sustainable fashion.

Read more less

Handcrafted from natural coconut shell, these earrings bring a unique island-inspired style with a lightweight and comfortable feel. Each piece features beautiful organic textures and earthy tones, making every pair one of a kind. Perfect for casual wear, beach outings, or adding a touch of tropical elegance to your look. Eco-friendly, durable, and artisan-made, these coconut shell earrings are a stylish celebration of nature and sustainable fashion.

Read more less

Handcrafted from natural coconut shell, these earrings bring a unique island-inspired style with a lightweight and comfortable feel. Each piece features beautiful organic textures and earthy tones, making every pair one of a kind. Perfect for casual wear, beach outings, or adding a touch of tropical elegance to your look. Eco-friendly, durable, and artisan-made, these coconut shell earrings are a stylish celebration of nature and sustainable fashion.

Read more less

Handcrafted from natural coconut shell, these earrings bring a unique island-inspired style with a lightweight and comfortable feel. Each piece features beautiful organic textures and earthy tones, making every pair one of a kind. Perfect for casual wear, beach outings, or adding a touch of tropical elegance to your look. Eco-friendly, durable, and artisan-made, these coconut shell earrings are a stylish celebration of nature and sustainable fashion.

Read more less

Handcrafted from natural coconut shell, these earrings bring a unique island-inspired style with a lightweight and comfortable feel. Each piece features beautiful organic textures and earthy tones, making every pair one of a kind. Perfect for casual wear, beach outings, or adding a touch of tropical elegance to your look. Eco-friendly, durable, and artisan-made, these coconut shell earrings are a stylish celebration of nature and sustainable fashion.

Read more less

Handcrafted from natural coconut shell, these earrings bring a unique island-inspired style with a lightweight and comfortable feel. Each piece features beautiful organic textures and earthy tones, making every pair one of a kind. Perfect for casual wear, beach outings, or adding a touch of tropical elegance to your look. Eco-friendly, durable, and artisan-made, these coconut shell earrings are a stylish celebration of nature and sustainable fashion.

Read more less

Handcrafted from natural coconut shell, these earrings bring a unique island-inspired style with a lightweight and comfortable feel. Each piece features beautiful organic textures and earthy tones, making every pair one of a kind. Perfect for casual wear, beach outings, or adding a touch of tropical elegance to your look. Eco-friendly, durable, and artisan-made, these coconut shell earrings are a stylish celebration of nature and sustainable fashion.

Read more less

Handcrafted from natural coconut shell, these earrings bring a unique island-inspired style with a lightweight and comfortable feel. Each piece features beautiful organic textures and earthy tones, making every pair one of a kind. Perfect for casual wear, beach outings, or adding a touch of tropical elegance to your look. Eco-friendly, durable, and artisan-made, these coconut shell earrings are a stylish celebration of nature and sustainable fashion.

Read more less

Handcrafted from natural coconut shell, these earrings bring a unique island-inspired style with a lightweight and comfortable feel. Each piece features beautiful organic textures and earthy tones, making every pair one of a kind. Perfect for casual wear, beach outings, or adding a touch of tropical elegance to your look. Eco-friendly, durable, and artisan-made, these coconut shell earrings are a stylish celebration of nature and sustainable fashion.

Read more less

Use Required Reading1. This machine has no reverse connection function, battery positive and negative lines can not be connected back, otherwise it will damage the inverter.2. There are four 16-square models for the use of two red and two together, two black and in, together. You can not use one alone. Otherwise the current is not enough to carry the high power.3. When the INVERTER is not in use, please turn off the inverter switch, so as not to affect the life of the internal components, loss of battery power.4. 12V high voltage protection voltage is 15V, 24V high voltage protection voltage is 29V, 48V high voltage protection voltage is 57V. Do not exceed the voltage, or the inverter will be high-voltage protection, do not work.5. If you want to extend the lead between the battery inverter to be thickened.6. Battery is how many volts must use how many volts inverter.7. The larger the battery number, the greater the power used. The power of the battery is small.8. Smart Fan has 2 boot modes1) The inslde temperature reaches 45 intelligent fan starts.2) If high power is used, the intelligent fan turns straight and the low power does not turn.PrefaceFirst of all, thank you for choosing our pure sine wave inverter products. All our products have been through strict production control and quality control and accurate testing and certification,all factory products meet the national standards. Users can buy and use! Thank you for buying our products again!Matters needing attention1. The installation and commissioning of the equipment shall be carried out by professional electrical maintenance personnel familiar with the struct-ure and operation hazards of the device.2. Failure to comply with this precaution may cause physical injury.3. Do not connect this equipment to the civil power distribution box, such as home lines.4. The inverter should be away from water, avoid water droplets on the mac-hine or gradually above, do not use wet hand plug or unplug.5. If the inverter is in a cool environment, the appropriate temperature should be -20degrees Celsius ~ 50 degrees Celsius, avoiding direct sunlight and hot air vents.6. Inverters should be kept away from flammable substances, or where flam-mable gases are accumulated.7. After long-term use, the inverter will heat, so avoid close to the heat-sensitive substances.8. Ensure smooth ventilation and good heat dissipation.9. High pressure danger, please do not open this machine.10. Use the right type of wire to avoid fuse because of excessive inverter current.11. Make sure the inverter connects the correct battery, otherwise it will fuse the fuse of the inverter. Turn off the switch when the machine is not in use.12. Please turn off the switch and clean with a dry cloth before cleaning.Do not use wet cloth or cleaning agent.Product CharacteristicsThe inverter adopts the SPWM technology of MCU micro-processing control, pure sine wave output and pure waveform. The unique dyna -mic current loop control technology ensures the reliable operation of the inverter. Strong load adaptability, including inductive load, capacitive load, resistive load, mixed load. Strong overload and impact resistance. With input overvoltage, undervoltage, overload, overheating, output short circuit and other perfect protection functions. Sinusoidal inverter adopts LCD liquid crystal display mode, the state is clear at a glance. Stable performance, safe and reliable, long service life.Product Application1. Power tools: Disk saw, drill, grinder, grinder, buffer, weeding machine and trimmer, air compressor2. Home entertainment electronics: Television, cassette recorders, video game consoles, audio, musical instruments, satellite equipment3. Industrial equipment: Cloud server, face recognition server, intelligent manufacturing robot, emergency system4. Household appliances: Vacuum cleaners, fans, fluorescent lamps and incandescent lamps, razors, sewing machines5. Office equipment: Computers, printers, monitors, fax machines, scanners, Kitchen appliances: Coffee maker, blender, ice marker, toasterProtective Function1. Low pressure alarm: buzzer with 1 Hz clearance 2 sound alarm.2. Low pressure protection: buzzer with 1 Hz clearance 3 sound continuous alarn3. Overpressure protection: buzzer with 1 Hz clearance 4 alarm.4. Overheat protection :80+/-5, overheat protection buzzer 1 Hz gap 5 alarm.5. Overload protection: overload protection 10S automatic turn off output5S automatic recovery, three consecutive automatic lock.6. Short circuit protection: Output Short Circuit Protection 1s shutdown lock.Installation RequirementsInverter installation with reference to local power requirements, the installation site must be dry, clean and well ventilated.1. Working temperature: -30 degree C to 40 degree C2. Storage conditions: -10 degree C to 50 degree C3. Relative humidity: 0-95%, no condensation4. Cooling: Forced ventilationFAQs and Solutions1. Outside interference: The inverter may be disturbed by some strong electromagnetic waves in use, such as nearby motors, power converters, strong magnetic fields, etc.2. The inverter has no reaction:1) The battery and inverter are not connected and reconnected.2) The pole of the battery is reversed and the fuse is fused. Replace fuse.3. Low output voltage1) Overload, load current exceeds nominal current, turn off partial load and restart.2) The input voltage is too low. Ensure that the input voltage is within the nominal voltage range.4. Low Voltage Alarm1) The battery is dead and needs to be charged.2) Battery voltage is too low or poor contact, recharge, check battery terminals or clean terminals with dry cloth.5. Inverter without output1) Battery voltage is too low, recharge or replace battery.2) The load current is too high, turn off part of the load and restart the inverter.3) Inverter overtemperature protection. Let the inverter cool down for a while and put it in a ventilated place.4) The inverter failed to start and restarted.5) Terminal connection, fuse, replace fuse.6. The inverter does not work: Check the power switch, fuse and battery connection or smoke. Specification: Package Weight One Package Weight 1.60kgs / 3.54lb One Package Size 32cm * 20cm * 8cm / 12.6inch * 7.87inch * 3.15inch   Qty per Carton 10 Carton Weight 17.00kgs / 37.48lb   Carton Size 42cm * 42cm * 32cm / 16.54inch * 16.54inch * 12.6inch    

Read more less

1. 6 Sizes: 3mm, 4mm, 5mm, 6mm, 6.5mm, 8mm, total quantity is 6 pcs.2. Mainly for thinner, low hardness of wood and soft metal hole processing, for high hardness stainless steel and other materials can not be processed.3. The main material is high-speed steel, with titanium and nitriding treatment. High speed steel is more abrasion resistant and durable than other metal materials. Specification: General Material Steel Package Weight One Package Weight 0.08kgs / 0.18lb One Package Size 10cm * 6cm * 2.5cm / 3.94inch * 2.36inch * 0.98inch   Qty per Carton 80 Carton Weight 8.00kgs / 17.64lb   Carton Size 27cm * 26cm * 22cm / 10.63inch * 10.24inch * 8.66inch  

Read more less

1. Premium PU Leather: The phone case is hand-made with selected high-quality PU leather and soft TPU inner shell, which brings a comfortable touch and protects your phone in all aspects.2. It adequately protects devices from the normal scratches, dirt, tear and wear.3. Convenient Kickstand: Stable kickstand lets you make hands-free video calls, read, or watch movies, liberate your hands for more efficient work.4. Practical Card Holder Function: 2 card slots and 1 cash compartment to store your credit cards, cash, or small notes for daily needed. The hole design on the surface of the card slot makes it easier for you to take out the card.5. Full Access Precise Cut-Out: Precise cutouts for speakers, charging ports, audio ports, and buttons. All buttons and cutouts are aligned well for easy access to all functions. Specification: General Compatible with     Samsung:  Galaxy A06 5G , Galaxy A06 4G Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 17cm * 8cm * 1.5cm / 6.69inch * 3.15inch * 0.59inch

Read more less

1. Durable: PU + TPU material, wear-resistant and durable. With good performance and high quality can be used for a long time.2. Protection: It adequately protects devices from the normal scratches, dirt, tear and wear.3. Card Wallet Case: Combination of a wallet and cell phone case, with ID credit card slots , it can be used as wallet to keep multi credit cards, cash, ID, and money.4. Kickstand function: Adjustable viewing angles, can be converted easily into a stand, freely and relaxed to enjoy video, movies, e-book, pictures, etc.5. Convenience: All buttons and ports can be accessed, charged, and connected to the headphone cable without removing the phone case.6. Wrist Strap Design: A small wrist strap is very convenient when you have no more hands to carry your phone.Note: The actual product is subject to the title model, and the model machine in the picture is only for reference. Specification: General Compatible with     Samsung:  Galaxy A05s Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 17cm * 8cm * 2cm / 6.69inch * 3.15inch * 0.79inch

Read more less

Description 1. Durable: PU + TPU material, wear-resistant and durable. With good performance and high quality can be used for a long time.2. Protection: It adequately protects devices from the normal scratches, dirt, tear and wear.3. Card Wallet Case: Combination of a wallet and cell phone case, with ID credit card slots , it can be used as wallet to keep multi credit cards, cash, ID, and money.4. Kickstand function: Adjustable viewing angles, can be converted easily into a stand, freely and relaxed to enjoy video, movies, e-book, pictures, etc.5. Convenience: All buttons and ports can be accessed, charged, and connected to the headphone cable without removing the phone case.6. Wrist Strap Design: A small wrist strap is very convenient when you have no more hands to carry your phone.Note: The actual product is subject to the title model, and the model machine in the picture is only for reference. Specification: General Compatible with     Samsung:  Galaxy S20 Ultra Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 18cm * 9cm * 1.5cm / 7.09inch * 3.54inch * 0.59inch

Read more less

Description Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in device. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed Specification: General Compatible with Lenovo:  V14 Package Weight One Package Weight 0.73kgs / 1.61lb One Package Size 40cm * 30cm * 9cm / 15.75inch * 11.81inch * 3.54inch

Read more less

Description 1. High quality replacement screen panel2. High resolution 1366 x 768 pixel3. 14 inch diagonal screen size4. Backlight Lamp: LED type5. Interface: EDP/30PIN6. Panel type: a-Si TFT-LCD7. Contrast Ratio: 500:18. Luminance: 220 cd/m29. Display scale: 16:910. Active Area: 309.399 x 173.952 mm11. Size: 315.9 x 205.1 x 3 mm Specification: Package Weight One Package Weight 1.15kgs / 2.54lb One Package Size 45cm * 33cm * 8cm / 17.72inch * 12.99inch * 3.15inch

Read more less

Description 1. DC power jack cable replacement for Lenovo ThinkPad T440 T440S T440 T450 T460 T470 P T450 DC30100KL00.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts. Specification: General Compatible with     ThinkPad:  T470p , T460 , T450 Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 10cm * 10cm * 1cm / 3.94inch * 3.94inch * 0.39inch

Read more less

Description 1. Wireless Bluetooth connection, compatible with PS52. Haptic feedback: Feel more with physically responsive feedback to your in-game actions.3. Adaptive triggers: Experience varying force and tension when interacting with your in-game gear and environment.4. Signature comfort: Enjoy an intuitive design featuring enhanced sticks and touch pad.Specification1. Material: ABS2. Charging cable: 1m3. Input: 5V 1500mA4. Wireless Technology: Bluetooth5. Connection distance: <10m Specification: Package Weight One Package Weight 0.36kgs / 0.79lb One Package Size 19cm * 15cm * 9cm / 7.48inch * 5.91inch * 3.54inch

Read more less

Description 1. Will give you precise gap every time2. Prevents electric damage3. Made from 6061-T6 aluminium that make it have a long lifetime and lightweight4. CNC-machined for precise cutting, you do not have to worry about fitting in5. Anodized finishing for a shiny long lasting finish6. Fits most 10mm,12mm,14mm threaded spark plugs Specification: Package Weight One Package Weight 0.39kgs / 0.86lb One Package Size 16cm * 6cm * 6cm / 6.3inch * 2.36inch * 2.36inch

Read more less

Description Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed Specification: General Compatible with     Tecno:  Pova Neo 2 Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Read more less

Description 1. This cable is designed for Starlink mini, with good compatibility, flexible length to choose, and suitable for DC12V-24V car power supply.2. Reliable mechanical performance: using 18AWG oxygen-free copper conductor, low resistance, high conductivity, double shielding anti-interference, can ensure long-term stable and efficient operation of network equipment.3. Durable performance: Made of high-quality PVC outer cover, it is strong, flexible, resistant to bending and has a waterproof design, making it suitable for harsh outdoor weather conditions.4. Easy installation: plug and play, no complicated settings are required to connect.5. Starlink accessories: compatible with Starlink mini replacement parts, optimized connection, can ensure stable connection performance. Specification: Package Weight One Package Weight 0.36kgs / 0.80lb One Package Size 24cm * 24cm * 5cm / 9.45inch * 9.45inch * 1.97inch

Read more less

Description 1. Professional and practical, compact and portable.2. Easy and convenient to carry and use.3. Professional repair tools aim to giving assistance during devices repairing.4. Adopt high quality metal materials, durable.5. Widely used in mobile phones, toys, small electronic products servicing. Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15cm * 10cm * 2cm / 5.91inch * 3.94inch * 0.79inch

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Advantages1. Large stock, fast delivery, can meet large purchasing plan2. Original top quality.3. Complete fit and work4. Supply quality warranty with professional serviceAbout the product1. Replacement LCD screen + touch screen digitizer assembly for iPhone 8 Plus.2. Replace your broken or unusable item with a new one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Specification: General Compatible with Apple:  iPhone 8 Plus Types LCD Screen + Touch Screen Digitizer Assembly Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Read more less

Description 1. Material: high speed steel2. Application: suitable for drilling and reaming of wood, aluminum, plastic boards, insulation boards and other materials with a thickness of about 4mm or less3. Universal hexagonal shank design, more convenient and solid clamping4. X-shape opening design, effectively reduce drill bit slippage5. Suitable for lithium drill, electrical drill, table drill, etc6. Stepped structure, practical and strong7. Specifications: 4-20 (9 steps): 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm; 3-12 (10 steps): 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm; 4-12 (5 steps): 4mm, 6mm, 8mm, 10mm, 12mm8. Weight: about 85g (bag packing) Specification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 10cm * 7cm * 3cm / 3.94inch * 2.76inch * 1.18inch

Read more less

Description 1. Material: high speed steel2. Outer edge angle: about 118 degrees3. Chip flute length: about 56mm4. Cutting diameter: about 50mm5. Blade diameter: about 26mm6. Shank diameter: about 6.35mm7. Weight: about 96g/setSpecification:- 3/16-1/2 inches: 3/16 inches (4.76mm), 1/4 inches (6.35mm), 5/16 inches (7.94mm), 3/8 inches (10.35mm), 7/16 inches (11.11mm), 1/2 inch (12.7mm)- 1/4-3/4 inches: 1/4 inches (6.35mm), 5/16 inches (7.94mm), 3/8 inches (10.35mm), 7/16 inches (11.11mm), 1/2 inches (12.7mm), 9/16 inch (14.28mm), 5/8 inch (15.88mm), 11/16 inch (17.46mm), 3/4 inch (19.05mm)- 1/8-1/2": 1/8" (3.18mm), 5/32" (3.97mm), 3/16" (4.76mm), 7/32" (5.56mm), 1/4" (6.35mm), 9/32 inches (7.14mm), 5/16 inches (7.94mm), 11/32 inches (8.73mm), 3/8 inches (9.53mm), 13/32 inches (10.32mm), 7/16 inch (11.11mm), 15/32 inch (11.91mm), 1/2 inch (12.7mm) Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 10cm * 10cm * 2cm / 3.94inch * 3.94inch * 0.79inch

Read more less

1. Material: rubber + iron2. Small size: 5.5x11.7mm; suitable for nails/circular air holes with a diameter less than 3mm3. Large size: 14x7mm; suitable for nails/circular air holes with a diameter less than 5mm4. Good airtightness, natural rubber wrapped surface, long service life, strong and elastic5. The nails use mechanized rapid glue dripping technology, so uneven surface wrapping is normal and does not affect normal use. It has a wide range of applications6. The screws are sandblasted and roughened. Special technology is used to cold-flow the metal and rubber into one, with high elasticity, strong toughness, and strong and not easy to fall off7. The cross slot at the tail is more consistent with the screwdriver8. Deepened thread + special glue, not easy to debond, high toughness, and easier to plug leaks Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 15cm * 15cm * 4cm / 5.91inch * 5.91inch * 1.57inch

Read more less